Chili Technology offers the ChiliPad Cube, also known simply because ChiliPad, a mattress pad featuring a built-in temperature regulation system that provides both heating and hvac.
The pad is constructed with a central control unit known as the Cube, which is connected to a network of silicone microtubes. ChiliPad owners add hot or cold water, which circulates through the tubes before coming to the Cube. The temperature can be adjusted manually or with a wireless remote; owners can preset the temperature in one degree increments at from 55 to 110 Fahrenheit (13 to 43 Celsius).
The ChiliPad can be in a total of seven areas. Four of these sizes Single, Twin XL, Full, and Split California King are single-zone pads, meaning possess one Cube unit and provide one temperature-regulated surface. One other three sizes Queen, King, and Master are dual-zone pads, making them a good choice for couples with differing temperature preferences. A Twin-size ChiliPad had previously been available, but eventually discontinued due to low demand.
What You Would like to Know About The ChiliPad
- The ChiliPad Cube single- and dual-zone mattress pads are most suitable for:
- Single sleepers and couples who experience temperature-related discomfort (either too hot or too cold) during the the evening.
- Homeowners would you like to spend on their hvac bills.
- Pregnant as well as other sleepers with medical conditions that creates excessively hot or excessively cold having sex.
The ChiliPad Cube may not be suitable for:
- Sleepers that do not experience significant temperature-related issues inside night.
- People who awaken easily a result of noise.
- Those who find mattress pads beneath their fitted sheets uncomfortable.
How Does the ChiliPad Work?
Follow these five steps to operate the ChiliPad Cube:
Secure the mattress pad
The pad should be unfolded and placed leading of the mattress and underneath a fitted sheet. The pad likewise has elastic corner straps that suited around the sides of the mattress for additional stability. The microtubes can be placed at the head or foot of the bed, depending on the owner's preferences.
Connect the tube for the cube
chilipad reviews The Cube should rest on an appartment surface with at least two feet (24?) of breathing room on either sides. It must be plugged into an AC outlet, and will be positioned with the actual tank leading to prevent leakage. Owners can utilize risers to position the Cube beneath their bed. Connect the male end in the external tube attachment to the Cube's female connector. When connecting the tube to the Cube, nowhere release button should be facing upward.
Fill the cube with water
The Cube has a gap on the highest in which water should be added. Unscrew the cap and add distilled water as necessary. Once the Cube has reached full water capacity, turn device on while using power button near the outlet. The Cube will produce an easy beep, and after that the tubes will to be able to fill with water. As water is distributed into the tubes, owners will need to add more distilled water to the Cube just before add water' indicator light goes finally out. They should then screw the cap back in place.
Please note: when new, the ChiliPad's water tank should possess a trace level of water inside; this indicates the product has undergone quality control tests in order to packaging. In the event the water is absent, then the ChiliPad may not have been properly suggestions.
Adjust temperature
Two buttons one with a flame icon and another with a snowflake icon are located next to the power button in the software. Owners use these two buttons maximize or lower the temperature in one-degree increments until their desired setting is reached. A temperature reading displays the owner's setting, not the ChiliPad's current temps. Once the temperature already been properly adjusted, the number will blink three time. Most temperature changes be effective within quarter-hour.
In accessory for manual controls, owners can program temperature settings with a wireless remote. To activate the remote, hold down the Cube's power button for five seconds; the unit will beep and show a blinking 888' inside of temperature show. Turn on the remote control at this point; the unit will beep again and display the present temperature permanent. To program the remote with a dual-zone pad, make sure one for the Cubes remains off throughout this process.
Power off cube when needed
chilipad reviews To put off the Cube, simply press the power button while it is going for walks. The display will immediately turn off, though enthusiasts may run for several moments a bit longer. Owners are advised to unplug the Cube when do not plan to use their ChiliPad in your next 24 plenty of. To drain the Cube, use an H-shaped tool that includes the ChiliPad; the cross-shaped end is treated to drain theCube, and also the hollow end is would often drain the mattress mattress pad.
Please keep in mind that dual-zone Chilipads (Queen, King, and California sizes) feature two microtube networks and a Cube styles. To operate these, simply follow the steps as listed above for all parties of the material.
Sizing and Pricing
Current prices for all available ChiliPad sizes are listed ultimately table below. Please note the pricing differences between pads the actual Cube included and replacement pads
ProductNew (Pad and Cube)Replacement (Pad Only)
Single-size ChiliPad Cube (Single-zone)$499$249
Twin XL-size ChiliPad Cube (Single-zone)$599$289
Full-size ChiliPad Cube (Single-zone)$699$299
Queen-size ChiliPad Cube (Dual-zone)$999$379
King-size ChiliPad Cube (Dual-zone)$1,199$399
California King-size ChiliPad Cube (Dual-zone)$1,199$399
Split California King-size ChiliPad Cube (Single-zone)$649$289
Additionally, customers may purchase replacement Cube units for $399.
ChiliPad Features and Specs
The ChiliPad's features, functions, and product specifications include the following:
Temperature range: The Cube can be programmed in one-degree increments to reach temperatures any place from 55 to 110 Fahrenheit (13 to 43 Celsius). Certain factors such as bedroom temperature and sleeper weight may affect temperature delivery.
Cube dimensions: The Cube measures 9 1/4 wide, 9 1/4 long, and 7 1/2 tall. It weighs roughly nine pounds.
Energy usage: The average ChiliPad uses 80 watts.
Power sources: The Cube's power cord must be plugged into an AC outlet to operate. The remote control requires two AAA electrical power.
Cord length: The cord measures eight feet (8) in dimension.
Material composition: The mattress pad is established from a polyester and cotton mix together. The microtubes are made of medical-grade rubber.
ChiliPad weight limit: The pad operates with as much as 500 pounds per zoom. However, heavier individuals could possibly not experience very same temperature range as lighter individuals.
ChiliPad dimensions: The table below lists width, length, and thickness dimensions for your ChiliPad each available type.
ChiliPad SizeZonesDimensions (Width x Length x Height)
Single130W x 75L x 3/4H
Twin Extra Long (XL)138W x 80L x 3/4H
Full153W x 75L x 3/4H
Queen260W x 80L x 3/4H
King276W x 80L x 3/4H
California King272W x 84L x 3/4H
Split California King136W x 84L x 3/4H
What's Added to a ChiliPad Purchase?
The contents of a ChiliPad box be based upon whether a single- or dual-zone pad was owned. A full breakdown is listed in the table losing weight.
Type of PadNumber of PadsNumber of CubesNumber of RemotesNumber of Drain Keys
Single-zone1111
Dual-zone1211
Additionally, all ChiliPad Cubes come with a user's manual, warranty, and registration card stoock.